View Full Version : Added a trailer break controller to the Mega.
MegaCabMan
02-01-2013, 06:12 PM
It took 22 min and $234.00.
203
First remove the side panel
204
Then the panel under the steering column.
205206
MegaCabMan
02-01-2013, 06:26 PM
Then remove the cubby hole panel. Note missing screws are the ones to take out.
208
209
Then put the controller in the cubby hole spot and secure using the screws you just removed and one extra.
210
Plug in the two plugs taped to the wiring harness right by the e-break.
211
Now put all of the panels back on.
212
When you get the kit from the dealer it should have 2 bezels (1 black & 1 tan), the controller, 2 Phillips screws, 1 torx screw and a very good set of instructions.
You don't have to use my write-up to do this. Really the only reason I posted this is to show how easy it was to do.
All that is left for me to do now is have the computer updated with the new part information so the control shows up in my EVIC. As understand this is purely optional and the controller is fully functional without the update.
your pictures aren't loading for me
BMRbrnSNRbrd
02-03-2013, 07:38 AM
I see them now.
vBulletin® v3.8.7, Copyright ©2000-2024, vBulletin Solutions, Inc.