11-30-2011, 04:20 PM
|
#1
|
|
Newbie
Join Date: Nov 2011
Age: 34
Posts: 48
|
The 5.9 360
Alright guys. This is the group I want to ask because no one knows Rams like you guys do. I have a 360 in my truck and its great but so frustrating because it takes forever to get up and move off the line but eventually hits power. I used to drive a Silverado with a 5.7 350 that had so much get up and go that it was crazy and I didn't realize how much it did till I had the 360. Any suggestions on how to get more power out of my 360 and get it moving more off the line? Thanks guys
|
|
|
|
11-30-2011, 04:30 PM
|
#2
|
|
Cummins Member
Join Date: Aug 2011
Location: Blanchard
Age: 29
Posts: 3,267
|
One word. Plenum. The magnum engines are known for blown Plenum gaskets. There's a kit you can get to fix it. I did it and its actually pretty easy to do as long as you have some mechanics know how. The Plenum sits between the engine and intake manifold. Dodge made the manifold aluminum and Plenum plate steel. The temps between those two metals is way different and eventually causes the gasket to blow. That more then likely the problem imo. Way you can check is to take the intake off the throttle body, open up the blades and look down the throat of the throttle body with a flashlight. If there's oil of any amount in there, you got a blown Plenum.
__________________
|
|
|
|
|
11-30-2011, 04:46 PM
|
#3
|
|
Newbie
Join Date: Nov 2011
Age: 34
Posts: 48
|
Alright man ill check that out and see if I can see anything. Thanks. One guy I asked just said that its a slow motor and doesn't have much get up and go in it
|
|
|
|
|
11-30-2011, 04:54 PM
|
#4
|
|
Cummins Member
Join Date: Aug 2011
Location: Blanchard
Age: 29
Posts: 3,267
|
Not sure about that one... the 360s usually go pretty quick. If it is the Plenum, here is the kit you need
http://www.hughesengines.com/Index/p...p?partid=26190
__________________
|
|
|
|
|
11-30-2011, 05:35 PM
|
#5
|
|
Newbie
Join Date: Nov 2011
Age: 34
Posts: 48
|
Alright well I went and took it off and first off, taking the stock intake off sucks, I need to put a new one on. Any suggestions on a replacement intake? I put an AEM on my Silverado and it was good, but don't know about Dodge. When I took it off, this is what I saw the picture below (I cant figure out how to put pics in my message, only thing I can figure out is just as an attachment)
Not necessarily liquid but looks like liquid was there at one time. Any thoughts?
|
|
|
|
|
11-30-2011, 05:40 PM
|
#6
|
|
Outdoorsman Member
Join Date: Aug 2011
Location: Moore, OK / Corning, NY
Age: 37
Posts: 3,240
|
make a photo bucket account and upload the pictures to there.. Then all you do is copy the IMG code and paste it in your post.. It's the easiest way to do it IMO
__________________
"Oilfield Outlaw"
|
|
|
|
|
11-30-2011, 05:47 PM
|
#7
|
|
Newbie
Join Date: Nov 2011
Age: 34
Posts: 48
|
Alright sorry, where do you post the IMG code, cause when I post it, the URL just shows up, no picture, thanks SMR101
|
|
|
|
|
11-30-2011, 05:48 PM
|
#8
|
|
Newbie
Join Date: Nov 2011
Age: 34
Posts: 48
|
Last edited by WillyBoy17; 12-01-2011 at 02:37 AM.
|
|
|
|
|
11-30-2011, 05:49 PM
|
#9
|
|
Newbie
Join Date: Nov 2011
Age: 34
Posts: 48
|
Hah, got it to work. Thanks S.M.R. 101. Alright ramthis9501, that is the picture I meant to attach to the message I sent you
|
|
|
|
|
11-30-2011, 06:00 PM
|
#10
|
|
Cummins Member
Join Date: Aug 2011
Location: Blanchard
Age: 29
Posts: 3,267
|
There's your problem... that's not supposed to be black lol you my friend have a blown Plenum. Time to get that kit ordered and replace the plate and gasket.
And good job on figuring out the img code lol
And just so you know, my name is Colton.
__________________
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Linear Mode
