Oklahoma Ram Club - View Single Post

Okiespaniels · 10-02-2011, 10:05 PM

I had this issue with my stock lights...probably the seal around the lens and housing leaked.
So I took my cordless drill and a 1/8 bit and drilled 3 holes in the bottom of the housing to let the water out and the housings "breathe". Since the mounts were in the way I drilled through them too.
Problem solved.

10-02-2011, 10:05 PM	#5
Okiespaniels Coffee, Gas, Ammo. Set! Join Date: Aug 2011 Location: Work, Garage, Computer room Posts: 685	I had this issue with my stock lights...probably the seal around the lens and housing leaked. So I took my cordless drill and a 1/8 bit and drilled 3 holes in the bottom of the housing to let the water out and the housings "breathe". Since the mounts were in the way I drilled through them too. Problem solved. Last edited by Okiespaniels; 10-02-2011 at 10:26 PM.