I'm all over the place...
 

Alright, you guys know that I cancelled my header order because BBK keeps pushing them back. Now I have $400 or so to play with but with the holidays coming up there won't be more...gotta hook the little man up.

Anyway, I'm sure you guys are tired of me picking different things to discuss, but with mod money being tight, I run all the options through to make sure I pick the right thing. Here are my thoughts:

First:

I could just stay with the BBKs. Yes they were delayed and yes they may do it again, but its a set of bolt-on ceramic coated headers for $400.

Second:

Moe's 87mm throttle body. I like this option because of how easy the install would be BUT there's no "show" with it. That's not the most important aspect, but being that my truck is much more show than go, I would like to add to both if possible.

Third:

I had discussed a cheap high performance stall converter (better M?) but the problem here, as pointed out by members with much more knowledge than myself, this may actually hurt me a bit because of my open differential not being able to transfer the increased torque to the pavement. Another downer is the install. While I would love to do it, pulling the trans on the ground in my garage sounds like hell.

Fourth:

I thought about some paint options, but found out today that my painter's manager nixed anymore side jobs at work, so I have to wait until he gets his home shop finished, but thats a couple of months out.

Fifth:

I was talking to my brother, who isn't a car guy, about what I could do that would be show and performance and he brought up something I did to my '04. Because the Boss 335s and my current wheels have such an open design, the brake rotors stick out like a sore thumb. On my '04 I slapped on a set of cross drilled rotors and it helped the look a ton and helped braking a bit. Thoughts about this? I can pick up a set just like I had on my old truck pretty affordably which would help show, help stop, and still leave a little change.

Anything else I haven't thought of?

Your truck is already quick enough I think. Headers would look good and sound good but waiting that long is something I couldn't do... lol I say go with the brake rotors because of the points you brought up. It'll help the show aspect of your truck and that is more what your aiming for anyways. Fast is definately fun but unless you start getting into cams and that sort of thing, headers or the throttle body won't really be worth it in your case imo. Go for show :D

You could buy my bumper......

I like the rotor idea myself... and I guess I'll spill some secrets I've observed.

Here's what I've found from going to (local) shows. Most local show judges are volunteers and not enthusiasts, per se' But here's what Traci and I believe most judges look at...

A. The engine compartment. How clean, organized and how much "power" does the engine convey?

B. Tires and rims...shined, detailed...rotors and calipers...eh. But if thay can be seen through the rims... they need to be painted and detailed.

C. Interior... Is it clean? Is it tastefully or as outrageous as the outside?

D. Display. Cute figurines and rat finks have thier place, but show boards rate at least a 2nd or 3rd glance. Its also a great way to point judges (and spectators) to mods that would likely be overlooked. Lastly, if you have a tribute or patriotic theme you are almost guaranteed gold...as long as no one else has the same build in your class!

I get pissed every single show I see that flag painted Del Sol with trophies on it!!!

Makes me want to move to Canada!

If you want the best performance, do the 4.10s and a good LSD. It is pricey, but it will make more difference than 2,000 dollars worth of all the other bolt on stuff. Torque convertor should be done last.

I would put money on a stock truck with 4.10s over any bolt on truck. I get beat by 3.92 LSD trucks with just an exhaust! Mine is getting mods in this order....and I have less money for stuff..


Gears/LSD....probably 1100-1200 bucks

Longtube OBX headers....550

Custom exhaust setup.....TBD

My 6.1 manifold swap with LMI hammer

Johan Tune.....TBD

Torque Convertor....525

ZEX wet kit....600

That looks like a good list to me! Should put the truck solidly in the low 13s!

Crap double post! Sorry all!

Thanks for the insight guys. I think I'm going to order the rotors but not the "ceramic" pads because they are too noisy. Ordering those will leave me with about half of my budget. I'm thinking its time to design a show board but use one where the lower piece has a plexy cover so I can redesign and replace the large mod/picture area whenever I want.

Hey Tim u better be ready to do something with that tranny. And I wouldn't put a Zex on my lawn mower either sniper or nitrous express

You know Jesse...if you would just get 4.56s installed it would end my decision making............I've got $400 with your name on it.

That sounds like a plan dude.. I think the rotors is a good idea with filling some of the open space in the wheels.

and a show board would be awesome!

Well...don't get me wrong, the rotors wont be any bigger, so they wont fill any more space. They will just look much better.

Well the visual of it will seem to catch the eye insead of looking into the dark space... Get me.. optical illusions type shit...

Well fate may be steering me away from the show board and to something else. I am definitely ordering the rotors though.

I like the rotor idea... What else you thinking about?

I don't even know where to order gears :/

Yukongear.com bruh!

I'm getting my gears from Moe's....cheapest place I've found. Yukon gears are under 200 bucks there!

I think either stick it out for the headers or get the new rotors and paint the calipers if you haven't already

That's a damn good price!

Check out this website when you get it. It has links to download the latest firmware. I did the Charger once before I swapped it out and it was pretty simple.

http://mofv.com/mygig/

Yup. :D Just waiting for him to get on and accept.

Oh hell yes

Nice dude

Just paid for the REN. About to order the rotors.

Rotors are now ordered as well.

Shit Son!!!

:GetMoney:...Easy come, easy go, right?

Eh, I just over analyze everything. I'm sure I'll get the headers in the spring.

Awesome man

Sweet!

i may have a 85mm tb for sale soon........... ;)

Going with the 87 are you? :D

returning to stock...........

2013?

fuck no.

Just kidding. This bitch isn't going anywhere. ;)

YEah, 87mm TB. :D

Haha hell yeah!

I'm thinking about going to 2500HD, 2013 :D

...or that RCSB R/T we talked about last night...