swirvin21
09-06-2013, 08:44 PM
I'm packing my bags and boxes and everything else to move back to Texas here very shortly. I'm excited about going home, but don't necessarily want to take everything with me. Unfortunately I won't have a shop or even a garage for at least 6 months, so all of my parts will be put up in storage. If you want to come by and look, I have everything from Artec trusses and brackets to axles, H1 wheels and 37" tires. I don't have to sell anything, but I will take reasonable offers to avoid storing or moving things...
Here's a brief list of what I can think of:
Axles Parts
-DRW Chevy hubs w/ spindles: $200 for all
-DRW Ford hubs: $150
-2004 F450 unit bearings (30 spline) and DRW adapters to convert 8 on 170mm to 8 on 225mm pattern, designed to allow use of 19.5" or 22.5" semi-wheels. Enough meat to convert to Rockwell, Unimog or other large 6 pattern. Good way to avoid having new UBs redrilled on each order: $300 for all parts listed
Jeep Parts
-NP231 TeraLow 4:1 complete working t-case w/ SYE eliminator and CV driveshaft: take $800 for both
-Boatside kit for TJ off a Pirate vendor: $300
-Artec rear 4 link conversion brackets
Dodge Parts
-1997 Dodge Ram SRW front Dana 60 4:10 ratio axle, complete less brakes/unit bearings, but can sell off parts, knuckles or whatever to someone interested. Have matching semi-rare SRW Dana 80 rear w/ 4.10s and LS, complete but disassembled: $800 for pair
-Knuckle conversion kit for 1994-1998/99 Ram 2500/3500. Knuckle-out conversion from 1996 F350 Dana 60 upgrades you to dual piston calipers and unit bearing elimination kit, stock parts, 30 spline outers: $800
-Dodge OffRoad Long arm frame side brackets, made out of 3/8" steel, bolt or weld-on. Allows for parallel 4-link setup: $250
-Have some chrome trim from my 2003 Dodge Ram 3500: couple billet grille inserts, those plastic window deflectors, chrome front wheel opening trim, chrome door handle covers, chrome mirror covers: $20 for all???
-think I have some other misc parts like leaf springs, radiator support, extended brake lines, etc
Tires
-Set of 5, 37x12.50R16.5 Goodyear MT/R on 24 bolt H1's 8 lug stock BS, 95% or better: $1000
-Set of 4, 37x12.50R16.5 Goodyear MT/R on aluminum 16.5x9.75 soft 8 style wheels w/ 5" or 5.5" BS, 80% or better tread: $800
-Set of 4, 37x12.50R16.5 Goodyear MT/R without wheels, have 1 piece rubber inserts inside, 50-60% tread: $300 for all 4
-Set of 4, 16.5x8.25 stock H1 24 bolt wheels, loose: $200
I would also consider selling either the Black Ram or my White Ram from my build threads.....sad I know, but with Kelly in her 3rd trimester I just can't justify so many toys. Think around $10K for the Black Ram and $5K for the White Ram, both that would come with a number of spare parts and other items. Have easily $7K in the Black Ram axles alone...
Open for trades, partial cash, etc etc. Not sure what all I would be willing to haul to TX, but I'm open to bang-bangs, tools, trailers (horse, flat, goose, enclosed, whatever), and other stuff.
Move quick if you're interested, will be packing and getting ready to haul most of it over the next week....
Thanks,
Kyle
918-729-2239
Here's a brief list of what I can think of:
Axles Parts
-DRW Chevy hubs w/ spindles: $200 for all
-DRW Ford hubs: $150
-2004 F450 unit bearings (30 spline) and DRW adapters to convert 8 on 170mm to 8 on 225mm pattern, designed to allow use of 19.5" or 22.5" semi-wheels. Enough meat to convert to Rockwell, Unimog or other large 6 pattern. Good way to avoid having new UBs redrilled on each order: $300 for all parts listed
Jeep Parts
-NP231 TeraLow 4:1 complete working t-case w/ SYE eliminator and CV driveshaft: take $800 for both
-Boatside kit for TJ off a Pirate vendor: $300
-Artec rear 4 link conversion brackets
Dodge Parts
-1997 Dodge Ram SRW front Dana 60 4:10 ratio axle, complete less brakes/unit bearings, but can sell off parts, knuckles or whatever to someone interested. Have matching semi-rare SRW Dana 80 rear w/ 4.10s and LS, complete but disassembled: $800 for pair
-Knuckle conversion kit for 1994-1998/99 Ram 2500/3500. Knuckle-out conversion from 1996 F350 Dana 60 upgrades you to dual piston calipers and unit bearing elimination kit, stock parts, 30 spline outers: $800
-Dodge OffRoad Long arm frame side brackets, made out of 3/8" steel, bolt or weld-on. Allows for parallel 4-link setup: $250
-Have some chrome trim from my 2003 Dodge Ram 3500: couple billet grille inserts, those plastic window deflectors, chrome front wheel opening trim, chrome door handle covers, chrome mirror covers: $20 for all???
-think I have some other misc parts like leaf springs, radiator support, extended brake lines, etc
Tires
-Set of 5, 37x12.50R16.5 Goodyear MT/R on 24 bolt H1's 8 lug stock BS, 95% or better: $1000
-Set of 4, 37x12.50R16.5 Goodyear MT/R on aluminum 16.5x9.75 soft 8 style wheels w/ 5" or 5.5" BS, 80% or better tread: $800
-Set of 4, 37x12.50R16.5 Goodyear MT/R without wheels, have 1 piece rubber inserts inside, 50-60% tread: $300 for all 4
-Set of 4, 16.5x8.25 stock H1 24 bolt wheels, loose: $200
I would also consider selling either the Black Ram or my White Ram from my build threads.....sad I know, but with Kelly in her 3rd trimester I just can't justify so many toys. Think around $10K for the Black Ram and $5K for the White Ram, both that would come with a number of spare parts and other items. Have easily $7K in the Black Ram axles alone...
Open for trades, partial cash, etc etc. Not sure what all I would be willing to haul to TX, but I'm open to bang-bangs, tools, trailers (horse, flat, goose, enclosed, whatever), and other stuff.
Move quick if you're interested, will be packing and getting ready to haul most of it over the next week....
Thanks,
Kyle
918-729-2239